Manual Built into Every Program
Mold Temperature Controllers
Mold Temperature Controller
Features
- High-precision temperature controller (PID controller), can accurately control and display the injection mold temperature within +- 1°
- Direct pump with durable seal. Aluminum motor housing for better heat dissipation.
- Automatic water refill and direct cooling.
Safety features:
- Reverse current relay warnings
- Pump reverse protection
- Pump overload protection
- Automatic shut down and alarm upon low water level
Power Supply:
- 3 Phase 208V/220V/240V 60Hz
- Pump reverse protection
- Pump overload protection
- Automatic shut down and alarm upon low water level
Don’t let your molds settle for less! Unleash precision with our mold temperature controllers. Don’t miss out—upgrade to our reliable thermolators for injection molding now for better molds and improved production!
| Model | Maximum Temp. (fahrenheit) | Heater | Pump Power | Maximum Flow Rate | Maximum Pressure | External Dimensions HxWxD(mm) | Piping | Weight | |
| Transfer Medium | Cooling | ||||||||
| CTM-W40 | 203 water | 6kw | 400w | 10.5 g/m | 50 psi | 27x13x27 | 3/8”x 2 | 3/8” | 99lb |
| CTM-W40H | 248 water | 6kw | 400w | 10.5 g/m | 50 psi | 27x13x27 | 3/8” x 2 | 3/8” | 110lb |
| CTM-W60L | 266 water | 9kw | 1 hp | 15.8 g/m | 85 psi | 27x13x33 | 3/8” x 4 | 3/8” | 117lb |
Automatic Mold Temperature Controller
Features:
- High-precision temperature controller (PID controller), can accurately control and display the injection mold temperature within +- 1°C
- One-piece stainless steel (SUS-304) tank, for more durability
- Can use water or oil as medium, depending on needed mold temperature
- Automatic shut down and alarm upon low medium level
- Conductive heating, for higher efficiency, more durability, better ventilation and protection of the medium liquid from carbonation
- Compact design
| Model | Maximum Operating Temp. | Capacity Medium Liquid | Heater | Pump Power (watt) | Max.Flow Rate (gal/m) |
Maximum Pressure | External Dimensions HxWxD (inch) | Piping | Weight | ||
| Water | Oil | Transfer Medium | Cooling | ||||||||
| CTM-12L | 203F |
302F
|
3.1 Gal | 6 kw | 400 | 9.25 | 35 psi | 27x13x27 | 3/8”x 2 | 3/8” | 103 Lb |
| CTM-12LH | 203F |
302F
|
3.1 Gal | 9 kw | 400 | 10.50 | 42 psi | 27x13x27 | 3/8”x 2 | 3/8” | 110 Lb |
