Mold Temperature Controller

Standard Type, CTM-W40, CTM-W40H

Features:

  • High-precision temperature controller (PID controller), can accurately control and display the injection mold temperature within +- 1°C
  • Direct pump with durable seal. Aluminum motor housing for better heat dissipation.
  • Automatic water refill and direct cooling.

    • Safety features:

  • Reverse current relay warnings
  • Pump reverse protection
  • Pump overload protection
  • Automatic shut down and alarm upon low water level
Model Maximum Temp.     (fahrenheit) Heater Pump  Power Maximum Flow Rate Maximum Pressure External Dimensions HxWxD(mm) Piping Weight
Transfer Medium Cooling
CTM-W40 203 water 6kw 400w 10.5 g/m 50 psi 27x13x27 3/8”x 2 3/8” 99lb
CTM-W40H 248 water 6kw 400w 10.5 g/m 50 psi 27x13x27 3/8” x 2 3/8” 110lb
CTM-W60L 266 water 6kw 1 hp 15.8 g/m 85 psi 27x13x33 3/8” x 4 3/8” 117lb

____________________________________________________________________________________________________________________________________

Automatic Mold Temperature Controller

Features:

  • High-precision temperature controller (PID controller), can accurately control and display the injection mold temperature within +- 1°C
  • One-piece stainless steel (SUS-304) tank, for more durability
  • Can use water or oil as medium, depending on needed mold temperature
  • Automatic shut down and alarm upon low medium level
  • Conductive heating, for higher efficiency, more durability, better ventilation and protection of the medium liquid from carbonation
  • Compact design
Model Maximum Operating Temp. Capacity Medium Liquid Heater Pump  Power (watt) Max.Flow Rate
(gal/m)		 Maximum Pressure External Dimensions HxWxD (inch) Piping Weight
Water Oil Transfer Medium Cooling

CTM-12L

 203F
302F
 3.1 Gal 6 kw 400 9.25 35 psi 27x13x27 3/8”x 2 3/8” 103 Lb

CTM-12LH

 203F
302F
 3.1 Gal 9 kw 400 10.50 42 psi 27x13x27 3/8”x 2 3/8” 110 Lb